Thursday, May 3, 2012

Electrical current


Thus far, we have discussed static charges. Static charges alone are useful, but not nearly as much as charges in motion. As you recall, electrons are most easily moved. However, for sake of ease in sign convention (keeping things positive, where positive), we define the following:

current (I) - the rate at which positive charge "flows"

I = Q/t

The unit is the coulomb per second, defined as an ampere (A). One ampere (or amp) is a tremendous amount of current - more than enough to kill a person. In fact, you can feel as little as 0.01 A. Typical currents in a circuit are on the order of mA (milliamperes).

We also define other new quantities in electricity: voltage, resistance, power

voltage (V) - the amount of available energy per coulomb of charge

V = E/Q

resistance (R) - the amount by which the voltage is "dropped" per ampere of current

R = V/I

You can also think of resistance of that which "resists" current. Typically, resistors are made of things that are semi-conductors (they conduct current, but less well than conductors, and better than insulators). Resistors are often made of carbon, but can also be made of silicon and other materials. The unit is a volt per ampere, defined as an ohm (Greek symbol, omega).

A convenient way to relate all the variables is embodied by Ohm's Law:


V = I R

As in, "Twinkle, twinkle little star, V is equal to I R."
Well, it works for me


What exactly *IS* a circuit?

An electrical circuit can be thought of as a complete "loop" through which charge can travel. Therefore, it actually has to be physically complete - there can be no openings. That is, the current actually has to have a full path to take.

But there is an exception:

If the supplied voltage is high enough, charge can "jump" an "open circuit." This is clearly a dangerous situation, and one way in which a person can get shocked. Think of the unfortunate situation of sticking your finger (or a paper clip, etc.) into an electrical outlet (or something like a toaster, for that matter). You would "bridge" the circuit, becoming in effect, a resistor.

That's bad.

more questions


Electrostatics questions

1. What is the difference between an electron and a proton: in terms of charge? In terms of mass? In terms of position in an atom?

2. By "charging" something, what is usually happening? If the object is becoming negatively charged? Positively charged?

3. What is the charge of a proton? An electron?

4. Explain the rotating meter stick demonstration (similar to how a balloon sticks to a wall).

5 What is a Van de Graaff generator?

6. What do you suppose occurs when lightning strikes?

7. What happens to the electrostatic force between two charged objects if the distance between them is doubled? Tripled? Halved?

8.  What do we mean by "fundamental" charge? What charges are fundamental?

practice problems


1. Describe what happens to a light ray as it enters a piece of glass (or tank of water, for that matter) -

a. at a zero degree angle (with respect to the normal)
b. at a non-zero angle

(Though the math may be less comfortable to you, a relationship called Snell's law describes this all perfectly.)

2. Describe the law of reflection.

3. What exactly is the focal length of a lens or mirror? Under what circumstances are images formed AT the focal point?

4. Does a flat/plane mirror have a focal length? Discuss.

5. What is the difference between real and virtual images?

6. Draw what happens when several parallel rays of light hit:

a. convex lens
b. concave lens
c. concave mirror
d. convex mirror
e. plane mirror

7. "An image always forms at the focal length of a lens or mirror." This statement is false. Discuss.

8. A convex lens is similar to a _____. Why?

9. A concave lens is similar to a ______. Why?

10. With a convex lens, a real image is formed everywhere except when the object is located _____.

11. When you are using a magnifying glass or make-up/shaving mirror, where are you placing the object  to get a magnified image? What type of image is this?

12. What is nearsightness and farsightedness?  What types of lenses are used for nearsightness and farsightedness?

13.  What is interference of light?

14.  How is interference related to holography?


Tuesday, May 1, 2012

Static electricity

Charge
As fundamental to electricity and magnetism as mass is to mechanics

Charge is a concept to quantitatively relate particles to each other, in terms of how they affect each other. Charge is represented by Q.

The basic idea - like charges repel (2 negatives or 2 positives). Opposite charges attract.

Charge is measured in terms on units called coulombs (C). A coulomb is a huge amount of charge - the charge due to 6.2 x 10^18 protons.  That's 6.2 billion billion protons.  A lot of charge, even though this takes up a small amount of actual space..

The charge of a proton is tiny: 1.6 x 10^-19 C.

(By the way, the number above is called the fundamental charge unit (represented by the letter e).  It is the reciprocal of the number of protons in one coulomb.)

Similarly, the charge of an electron is the same value but negative (by definition): -1.6 x 10^-19 C

The Charge of a neutron is 0 C, or neutral.

How particles interact with each other is embodied in a physical law called Coulomb's law:

F = k Q1 Q2 / d^2

Or, the force tha exists between 2 particles is proportional to the product of charges divided by the distance squared. A proportionality constant is used to make units work out nicely.

Note that this is an inverse square law like gravitation.

The big 3 of particles are:

Proton
Neutron
Electron

However, of these onl the electron is "fundamental," meaning that it can't be further subdivided. Protons and neutrons can be broken up into quarks.

There are 6 types of quarks - up, down, top, bottom, charm, strange. The names mean nothing.

They are exotic particles which typically do not exist alone in nature.

A proton is: 2 ups and a down quark.
A neutron is: 2 downs and an up quark.

Well over 100 particles exist, but few are fundamental.

FYI:  an up quark has a charge of 2/3 e (that's the charge of 2/3 of a proton), and a down quark has the charge of -1/3 a proton (which is like 1/3 of an electron).

Tuesday, April 24, 2012

Ripple Tank applet revisited.

http://www.falstad.com/ripple/

Choose "2 sources" or "Double slit" to review the phenomena discussed in class.

Holography

Diffraction and Holography



When light passes through small openings or around barriers, it can actually interfere with itself - this is called diffraction. Like interference, patterns can result - and these patterns are related to the opening or barrier that caused the diffraction.


Holography is an interference phenomenon, caused by two beams - a reference beam, coming from the laser, and an object beam (which reflected off the object). This interference pattern is burned into the film emulsion of holographic film. It can be reconstructed when light passes through it again.

Interference and Diffraction




Consider 2 waves meeting each other in the same space. Their energies (AKA wave amplitudes) can add (or subtract). This phenomenon is called interference. If you've ever added sine waves on a calculator before, the effect is similar - and sometimes also called superposition.

Crests can add to other crests or cancel with troughs - however, it's usually some combination, depending on the waves in question. And often, beautiful "interference patterns" can result.