Thursday, April 19, 2012

Lenses

As shown and discussed in class, light refracts TOWARD a normal line (dotted line, perpendicular to surface of lens) when entering a more dense medium.

Note, however, that this direction of bend changes from down (with the top ray) to up with the bottom ray. This is due to the geometry of the lens. Look at the picture to make sure that this makes sense.


The FOCAL LENGTH (f) of a lens (or curved mirror) where the light rays would intersect, but ONLY IF THEY WERE INITIALLY PARALLEL to each other. Otherwise, they intersect at some other point, or maybe not at all!

The location of images can be predicted by a powerful equation:

1/f = 1/di + 1/do

In this equation, f is the theoretical focal length (determined by the geometry of the lens or mirror), do is the distance between the object and lens (or mirror) and di is the distance from lens (or mirror) to the formed image.

We find several things to be true when experimenting with lenses. If the object distance (do) is:

greater than 2f -- the image is smaller
equal to 2f -- the image is the same size as the object (and is located at a di equal to 2f)
between f and 2f -- the images is larger
at f -- there is NO image
within f -- the image is VIRTUAL (meaning that it can not be projected onto a screen) and it appears to be within the lens (or mirror) itself

If an image CAN be projected onto a screen, the image is REAL. Convex lenses (fatter in the middle) and concave mirrors (like the inside of a spoon) CAN create real images - the only cases where there are no images for convex lenses or concave mirrors are when do = f, or when do < f. In the first case, there is NO image at all. In the second case, there is a magnified upright virtual image within the lens.

Concave lenses (thinner in the middle) NEVER create real images and ONLY/ALWAYS create virtual images. This is also true for convex mirrors (like the outside of a spoon, or a convenience store mirror).

Play around with this applet:

http://www.physics.metu.edu.tr/~bucurgat/ntnujava/Lens/lens_e.html

Convex lenses (which are defined to have a positive focal length) are similar to concave mirrors.

Concave lenses (which are defined to have a negative focal length) are similar to convex mirrors.


This is a bit more complicated, but here are some images and information for mirrors:

http://www.physicstutorials.org/home/optics/reflection-of-light/curved-mirrors/concave-mirrors


Total Internal Reflection

We've looked at light going from air (or a vacuum) into water (or glass, etc.). Now imagine it the other way around: going from water into air. Clearly, the light ray will be bent AWAY from the normal line. Several rays are shown in this image - the normal lines are indicated by a dotted line.

As the light ray hits the water surface at a greater and greater angle, eventually the light ray can NOT leave the water. That is, it "skates" along the surface (angle equal to 90 degrees). Any angle greater than this so-called "critical angle" results in the light reflecting BACK INTO the water. This phenomena is called: TOTAL INTERNAL REFLECTION

It is the secret behind fiber optics.

Thursday, April 12, 2012

Refraction applets

http://www.physics.uoguelph.ca/applets/Intro_physics/refraction/LightRefract.html

http://www.walter-fendt.de/ph14e/refraction.htm

http://interactagram.com/physics/optics/refraction/

More about refraction

Refraction, in gross gory detail

Consider a wave hitting a new medium - one in which is travels more slowly. This would be like light going from air into water. The light has a certain frequency (which is unchangeable, since its set by whatever atomic process causes it to be emitted). The wavelength has a certain amount set by the equation, c = f l, where l is the wavelength (Greek symbol, lambda).

When the wave enters the new medium it is slowed - the speed becomes lower, but the frequency is fixed. Therefore, the wavelength becomes smaller (in a more dense medium).

Note also that the wave becomes "bent." Look at the image above: in order for the wave front to stay together, part of the wave front is slowed before the remaining part of it hits the surface. This necessarily results in a bend.

The general rule - if a wave is going from a lower density medium to one of higher density, the wave is refracted TOWARD the normal (perpendicular to surface) line. See picture above.

Reflection and Refraction



Reflection - light "bouncing" off a reflective surface. This obeys a simple law, the law of reflection!

The incident (incoming) angle equals the reflected angle. Angles are generally measured with respect to a "normal" line (line perpendicular to the surface).

Note that this works for curved mirrors as well, though we must think of a the surface as a series of flat surfaces - in this way, we can see that the light can reflect in a different direction, depending on where it hits the surface of the curved mirror. More to come here.

Refraction

Refraction is much different. In refraction, light enters a NEW medium. In the new medium, the speed changes. We define the extent to which this new medium changes the speed by a simple ratio, the index of refraction:

n = c/v

In this equation, n is the index of refraction (a number always 1 or greater), c is the speed of light (in a vacuum) and v is the speed of light in the new medium.

The index of refraction for some familiar substances:

vacuum, defined as 1
air, approximately 1
water, 1.33
glass, 1.5
polycarbonate ("high index" lenses), 1.67
diamond, 2.2

The index of refraction is a way of expressing how optically dense a medium is. The actual index of refraction (other than in a vacuum) depends on the incoming wavelength. Different wavelengths have slightly different speeds in (non-vacuum) mediums. For example, red slows down by a certain amount, but violet slows down by a slightly lower amount - meaning that red light goes through a material (glass, for example) a bit faster than violet light. Red light exits first.

In addition, different wavelengths of light are "bent" by slightly different amounts. This is trickier to see. We will explore it in the next blog entry.



http://www.physicsclassroom.com/class/refln/

Electromagnetic Spectrum



Recall that waves can be categorized into two major divisions:

Mechanical waves, which require a medium. These include sound, water and waves on a (guitar, etc.) string

Electromagnetic waves, which travel best where there is NO medium (vacuum), though they can typically travel through a medium as well. All electromagnetic waves can be represented on a chart, usually going from low frequency (radio waves) to high frequency (gamma rays). This translates to: long wavelength to short wavelength.

All of these EM waves travel at the same speed in a vacuum: the speed of light (c). Thus, the standard wave velocity equation becomes:

c = f l

where c is the speed of light (3 x 10^8 m/s), f is frequency (in Hz) and l (which should be lambda) is wavelength (in m).

Sunday, April 8, 2012

Doppler Effect problems, etc.

The "ripple tank" applet I showed in class:

http://falstad.com/ripple/

See also this simple, but effective applet:

http://lectureonline.cl.msu.edu/~mmp/applist/doppler/d.htm

In this simulation, v/vs is the ratio of your speed to the speed of sound; e.g., 0.5 is you, or the blue dot, traveling at half the speed of sound. Note how the waves experienced on one side "pile up" (giving an observer a greater detected frequency, or BLUE SHIFT); on the other side, the waves are "stretched apart" (giving an observer a lower detected frequency, or RED SHIFT).

In astronomy, the red shift is very important historically: Edwin Hubble found that light from distant galaxies (as measured in their spectra) was red shifted, meaning that distant galaxies were moving away from us (everywhere we looked). The conclusion was obvious (and startling): The universe is expanding. Last year, local astrophysicist Adam Riess discovered that the rate of expansion was accelerating.

http://www.nobelprize.org/nobel_prizes/physics/laureates/2011/


It's worth noting that the effect also works in reverse. If you (the detector) move toward a sound-emitter, you'll detect a higher frequency. If you move away from a detector move away from a sound-emitter, you'll detect a lower frequency.

Mind you, these Doppler effects only happen WHILE there is relative motion between source and detector (you).

And they also work for light. In fact, the terms red shift and blue shift refer mainly to light (or other electromagnetic) phenomena.